TECHNICAL SPECIFICATIONS
 
Format: 1U 19" rackmount enclosure
Channels: Up to 16 balanced analog/digital channels (2 blocks of 8 channels)
Internal Architecture: 100% PCB-based direct soldering (zero internal cable harness wiring)
Connector Quality: Genuine Neutrik XLR/Combo connectors and heavy-duty DB25 ports
Pinout Standards Supported:
Analog Tascam (AES59-2012 standard)
Digital Tascam (AES/EBU)
Digital Yamaha (AES/EBU)
Chassis: Powder-coated aluminum chassis with channel labeling fields
 
CONFIGURATION OPTIONS (BLOCK A & BLOCK B)
 
Customize Block A (Channels 1–8) and Block B (Channels 9–16) independently with any of the following module options:
 
Option Name
 
Connections per 8-Ch Block
 
Description / Primary Use Case
 
Tascam - Analog In (XLR Female)
 
8x Neutrik NC3 FAH1 Female XLR
 
8-channel analog line inputs to DB25 output
 
Tascam - Analog In (Combo)
 
8x Neutrik NCJ6 FAH Combo Jacks
 
8-channel analog inputs supporting both XLR & 1/4" TRS plugs
 
Tascam - Analog Out (XLR Male)
 
8x Neutrik NC3 MAH Male XLR
 
8-channel analog line outputs from DB25 input
 
Tascam - Digital In/Out
 
4x Female XLR + 4x Male XLR
 
8-channel digital AES/EBU I/O (4 In/4 Out) Tascam standard
 
Yamaha - Digital In/Out
 
4x Female XLR + 4x Male XLR
 
8-channel digital AES/EBU I/O (4 In/4 Out) Yamaha standard
 
 
 
DETAILED FEATURES
 
Direct-PCB Soldered Design: Zero internal wires mean no broken solder joints over time, pristine signal transmission, and zero added capacitance
Independent Block A/B Modular Flexibility: Mix an 8-channel analog input section on Block A with an 8-channel analog output section on Block B – or set up an analog/digital hybrid box
AES59-2012 Tascam Compliance: Standardized DB25 pinout guarantees plug-and-play compatibility with modern audio interfaces (Universal Audio, RME, Focusrite, Antelope, SSL, Lynx, etc.)
Heavy-Duty Neutrik Hardware: Fitted exclusively with high-grade Neutrik XLR and Combo connectors for smooth insertion and maximum duty cycle
Integrated Front-Panel Labeling Fields: Dedicated white labeling strips make channel organization and routing identification fast and effortless in dark studio racks
 
WHAT'S INCLUDED IN THE KIT?
 
This is a full DIY kit (or pre-assembled depending on purchase selection) containing:
1U powder-coated 19" rack chassis with pre-printed front/rear panels
Main internal PCBs and DB25 connectors
Full set of Neutrik XLR/Combo connectors according to your chosen Block A and Block B selections
Mounting hardware and assembly screws
 
(Note: Requires soldering if purchased as a DIY kit. Interactive assembly guides are available in our Build Manuals section.)