TECHNICAL SPECIFICATIONS
 
Module Compatibility: Standard 500 VPR Alliance modules (15-pin format)
Extension Interface: In-Rack PCB adapter with preassembled 100cm 14-pin ribbon cable
Edge Connectors: 15-position EDAC connectors
Test Points: 4mm Hirschmann banana jacks for VPR voltage rails
Supported Voltage Rails: ± 16V, + 48V 
Audio I/O: Direct signal pass-through from rack plus external XLR Input and Output sockets
Power Input Options:
Direct power tapping from host 500-series rack slot via 100cm cable
NC5 MAV 5-pin XLR input for external VPR power supplies
4mm banana sockets for benchtop laboratory power supplies
7-pin Phoenix terminal strip for multi-board power distribution
 
DETAILED FEATURES
 
Live In-Rack Testing: Run and align your 500-series modules in real time using the power and audio connections directly from your 500-series chassis.
1 Meter Cable Flexibility: The generous 100cm cable length allows convenient placement of the test board on your workbench next to the rack.
Direct Rail Voltage Monitoring: Dedicated 4mm Hirschmann test points provide fast, accurate checking of +16V, -16V, and +48V rails with standard multimeter leads.
Flexible Power Options: Operate the module directly from the host rack, connect a bench supply via banana jacks, or use an external 5-pin VPR power supply.
Multi-Board Expansion: Built-in 5-pin Phoenix terminal strip allows interconnecting additional extension boards for expanded test setups.
 
CASE PARTS OPTION AND 3D PRINTING
 
Included in Case Parts Kit: Threaded M3 inserts, M3 assembly screws, and precision front and rear panels.
Case Frame Requirement: The external box enclosure is a 3D-printed housing. You can download the official 3D STL print files directly from Printables.com to print the chassis yourself.
 
WHATS INCLUDED IN THE KIT
 
Main EXT VPR test PCB and In-Rack interface PCB
Preassembled 100cm 14-pin extension cable
15-pin EDAC edge connector, Neutrik XLR sockets, and 4mm Hirschmann banana jacks
7-pin Phoenix terminal strip, power socket, and mounting hardware
Case Hardware (if selected): M3 inserts, M3 screws, front and rear panels
 
Note: Requires soldering. Assembly instructions and 3D print links available in our Build Manuals section.